Metrohm tiamo 1.1 Manual - Manual (Page 760)

732 Configuration
Column display
With Edit, Column display... the dialog window Column display opens. Here you can
define the columns to be shown in the Sensor table.
Columns available
Shows all the fields that can be shown as columns in the Sensor table.
Columns displayed
Shows all the fields that will be shown as columns in the Sensor table. The
default situation is that the columns
Sensor name, Sensor type, Start up, Ex-
piry date, Slope, pH(0)/E(0) and Next calibration will be shown. The two col-
umns Sensor name and Sensor type are always present and cannot be re-
moved.
Adds the selected column to the table.
Removes the selected column from the table.
Alters the sequence of shown columns by moving the selected column up-
ward or downward.
Add new sensor
In order to add a new sensor to the Sensor table the menu item Edit, New must be
pressed and then one of the following possible sensor types must be selected:
•
pH electrode
• Metal electrode
•
ISE electrode
• Temperature sensor
• Other sensor
The Properties window then opens automatically for the configuration of the sen-
sor. If the sensor type
ISE electrode is selected then the dialog window New ISE
electrode will open first for the definition of the measuring ion.