Metrohm tiamo 1.1 Manual - Manual (Page 516)

488 Method
STDADD
Commands for standard addition.
The following commands can be selected:
• STDADD man
Standard addition with manual addition of the standard addition solu-
tion.
• STDADD dos
Standard addition with addition of the standard addition solution from
a dosing device.
• STDADD auto
Standard addition with automatic addition of the standard addition so-
lution from a dosing device in such a way that a constant potential dif-
ference results.
STDADD man
Command for Standard addition with manual addition of the standard addition
solution.
Devices
This command can be executed with the following devices:
Titrando: 808, 809, 835, 836, 855
Appearance
The command has the following appearance:
Parameters
The parameters for the command STDADD man are configured on the following 3
tabs:
• General/Hardware
Parameters for device, dosing device, sensor and stirrer.
•
Standard addition
Parameters for standard addition.
•
Measuring parameters
Parameters for the measurement.
Standard addition curve
The standard addition curve with its evaluation data for a determination is shown
in the program part Database in the dialog window Calibration curve which is
opened with the menu item Determinations, Show calibration curve... or the sym-
bol
.