Metrohm tiamo 1.1 Manual - Manual (Page 791)

Backup 763
7.2.2 Restore database
1. Select program part Database.
2. Click on symbol or menu item File, Database manager... .
The window Database manager opens.
3. Click on [Restore] in the dialog window Database manager .
The window Restore databases opens.
4. Select the Backup directory that contains the desired backed up database.
5. Select or enter the Backup name for the desired database.
6. For Save as , enter name under which the database is to be restored.
7. Start database revovery with [Start] .
Note
Existing databases cannot be overwritten, i.e. they must first be deleted so that
the database can be recovered under its old name.
7.2.3 Backup configuration data
General
The configuration data in tiamo is saved in the configuration database. Under
configuration data is to be understood all tiamo method-embracing settings for
devices, titrants/solutions, sensors, common variables and rack data. Configura-
tion data also includes methods, security settings, user administration, program
administration, templates, and Audit Trail.
For local server systems (tiamo light, tiamo full) the configuration database is lo-
cated in the program folder of the computer on which the program has been in-
stalled. In client-server systems (tiamo multi) the configuration database is stored
centrally on the server and saves and contains all the configuration data of all
computers (clients) that are connected to this server.
Backup configuration data manually
1.
Select program part Configuration.
2. Click on symbol or menu item File, Backup, Manually .
The window Backup configuration data manually opens.
3. Select Backup directory.
4. Select or enter Backup name . If an existing backup file is selected it will be overwrit-
ten.
Note
If the backup directory is on a network drive the backup date should be added
manually to the
Backup name because the backup date information is not avail-
able on restoring.
5. Start manual backup of the configuration database with [Start] .