Metrohm tiamo 1.1 Manual - Manual (Page 177)

Subwindow Live display 149
Curve display
[ on ], off
If this option is enabled then the required curves will be shown in the sub-
window Live display .
x Axis
[ Volume ], Measured value, Time, Temperature, ERC, Calculated 1...3, External
1...3
(for DET)
[ Volume ], Measured value, Time, Temperature, dMW, Calculated 1...3, External
1...3
(for MET)
[ Time ], Measured value, Temperature, Volume, dV/dt, Calculated 1...3, External
1...3
(for SET)
[ Time ], Measured value, Temperature, Volume, dV/dt, Calculated 1...3, External
1...3
(for KFT)
[ Time ], Measured value, Water, Drift, Charge, Ugen, Igen, Calculated 1...3, Ex-
ternal 1...3
(for KFC)
[ Time ], Measured value, Temperature, Volume, dV/dt, Calculated 1...3, External
1...3
(for STAT)
[ Time ], Measured value, Temperature, dMV/dt, Calculated 1...3, External 1...3
(for MEAS)
[ Time ], Measured value, Flow, Calculated 1...3, External 1...3 (for MEAS
T/Flow
[ Time ], Measured value, Temperature, Volume, dV/dt, Calculated 1...3, External
1...3
(for DOS)
Selection of the quantity to be shown on the x-axis.
y1 Axis
[ Measured value ], Volume, Time, Temperature, ERC, Calculated 1...3, External
1...3
(for DET)
[ Measured value ], Volume, Time, Temperature, dMW, Calculated 1...3, External
1...3
(for MET)
[ Volume ], Measured value, Temperature, Time, dV/dt, Calculated 1...3, External
1...3
(for SET)
[ Volume ], Measured value, Temperature, Time, dV/dt, Calculated 1...3, External
1...3
(for KFT)
[ Water], Measured value, Time, Drift, Charge, Ugen, Igen, Calculated 1...3, Ex-
ternal 1...3
(for KFC)
[ Time ], Measured value, Temperature, Volume, dV/dt, Calculated 1...3, External
1...3
(for STAT)
[ Measured value ], Time, Temperature, dMV/dt, Calculated 1...3, External 1...3
(for MEAS)
[ Measured value ], Time, Flow, Calculated 1...3, External 1...3 (for MEAS
T/Flow)
[ Time ], Measured value, Temperature, Volume, dV/dt, Calculated 1...3, External
1...3
(for DOS)
Selects the quantity to be shown on the y1-axis (left-hand y-axis).
Color
Color selection, [ blue ]
Selection of the color for the curve of the quantity to be shown on the y1-
axis.
y2 Axis
[ off ], Measured value, Volume, Time, Temperature, ERC, Calculated 1...3, Ex-
ternal 1...3
(for DET)
[ off ], Measured value, Volume, Time, Temperature, dMW, Calculated 1...3, Ex-
ternal 1...3
(for MET)
[ off ], Measured value, Volume, Temperature, Time, dV/dt, Calculated 1...3, Ex-
ternal 1...3
(for SET)
[ off ], Measured value, Volume, Temperature, Time, dV/dt, Calculated 1...3, Ex-
ternal 1...3
(for KFT)
[ off ], Measured value, Time, Water, Drift, Charge, Ugen, Igen, Calculated 1...3,
External 1...3
(for KFC)
[ off ], Measured value, Volume, Temperature, Time, dV/dt, Calculated 1...3, Ex-
ternal 1...3
(for STAT)