Metrohm tiamo 1.1 Manual - Manual (Page 598)

570 Method
RECEIVE - event/state
Command
Command
Name of the command whose event message is waited for.
Event message
Event message, [ 'empty' ]
Selecting the event message/status to be waited for. The following event
messages and status can be selected:
Event/Status Type Meaning Commands
Start Event Command has been started. All
End Event Command has been finished. All
Dosing Event The dosing of the titration has been started. DET , MET
Measure Event The measurement of the titration has been started. DET , MET
Busy Status System is in condition BUSY , HOLD or ERROR . All
Finished Status Command has been finished at least once. All
Cond Status
Conditioning is running ( COND BUSY or COND HOLD ); the
Start drift has not yet been reached.
SET , KFT , KFC
Condok Status
System is conditioned ( COND READY ); the Start drift has
been reached.
SET , KFT , KFC
Note
An event can only be received if the RECEIVE command has been started be-
fore the event it is waiting for whereas a status can be scanned anytime.
Comment
250 characters, [ 'empty' ]
Comment about the event message.