Metrohm tiamo 1.1 Manual - Manual (Page 792)

764 How to proceed
Backup database automatically
1.
Select program part Configuration.
2. Click on menu item File, Backup, Automatically .
The window Backup configuration data automatically opens.
3. Enable the option Automatic backup .
4. Enter Interval for backup monitoring or date for Next backup .
5. Select Backup directory .
6. Close window Backup configuration data automatically with [OK] .
7.2.4 Restore configuration data
tiamo light, tiamo full
1. Close
tiamo.
2. Start ConfigRestore.exe in the program directory ...\tiamo\bin .
The dialog window Restore configuration data opens.
3. Select the Backup directory that contains the desired backed up configuration da-
tabase.
4. Select or enter the Backup name for the desired database.
5. Start configuration database revovery with [Start] .
tiamo multi
1.
Make sure that tiamo is closed on all clients connected to the server and on the
server itself.
2. Start ConfigRestore.exe in the program directory ...\tiamo\bin on the server.
The dialog window Restore configuration data opens.
3. Select the Backup directory that contains the desired backed up configuration da-
tabase.
4. Select or enter the Backup name for the desired database.
5. Start configuration database revovery with [Start] .
7.2.5 Backup methods
General
Methods are stored in the configuration database and are globally accessible for
all clients. This means that in order to save methods the configuration data must
be saved manually or automatically. A further possible way is to export the meth-
ods and then to save these files externally from tiamo.
Backup configuration data manually
1.
Select program part Configuration.
2. Click on menu item File, Backup, Manually .
The window Backup configuration data manually opens.
3. Select Backup directory .