Metrohm tiamo 1.1 Manual - Manual (Page 269)

Subwindow Determination overview 241
Overlay curves
With the menu item Determinations, Overlay curves... or the symbol the dialog
window Overlay curves opens in which overlaying curves of the selected determi-
nations can be shown according to the loaded template.
Template
[ Standard ], 'Template name'
Selection of the saved Template for showing overlaying curves. When the
dialog window is opened the last template to have been loaded will be
shown. If a new template is selected then the display will be updated auto-
matically.
Note
In the template the
Command type is defined for which the overlaying of curves is
possible. Curves from the selected determinations can only be overlaid when
the determination method contains a command with this Command type (e.g.
DET ).
Command name
Selection of command
Selection of the name of the command whose curves are to be overlaid.
This selection is only necessary if the method contains several commands
of the same
Command type .
Open the dialog window Curve overlay templates .
Graphical presentation
Shows the curves according to the settings of the selected template. The com-
mand type (e.g. DET pH ) is shown centrally above the graph. At the right of the
curve the legend is shown with the line number in the determination table belong-
ing to the determination.