Metrohm tiamo 1.1 Manual - Manual (Page 156)

128 Workplace
Sample data
Under Sample data the current working sample table is shown that contains the
sample data for the determination series in tabular form. Each line corresponds to
a single determination.
Working sample table
The table contains the sample data lines already saved in the sample table as well
as a line for entering new data which contains an asterisk instead of the line num-
ber. The table cannot be directly edited or sorted.
For the meaning of the columns please refer to Edit sample data.
The lines in the working sample data table can have different background colors:
Light gray background
Processed lines. Data in these lines can no longer be altered. These lines
only appear when on the tab
Process in the properties of the determination
series the option Delete processed lines is switched off.
Dark gray background
Selected processed line.
Light orange background
Currently running line.
Dark orange background
Selected currently running line. If sample data is only altered after the start
of the determination (in the status
BUSY ) then this is regarded as being a
live modification.
White background
Lines that have not yet been processed. These lines can be edited.
Turquoise background
Selected line that has not yet been processed.
Loaded
Shows the sample table whose data has been loaded into the working
sample table with
Sample table, Load... . If no sample table has been loaded
or if all the lines have been deleted then this field will be empty. If data in a
loaded sample table is later altered or if new lines are added then in addi-
tion to the name
(modified) will be shown.
For possible ways of editing the working sample table and the window menu
please refer to Edit working sample data.
Determination run
In a series of determinations that are started on the tab Determination series in the
subwindow Run each determination takes place as follows:
1 - Load sample data
The sample data entered in the working sample table for the current line will be
loaded for the determination.
2 - Select method
Method selection triggers the following actions:
• Select method without assignment ID
If the option Method selection by assignment ID is not switched on the
tab Process then the method selected in the field Method will remain
loaded.