Metrohm tiamo 1.1 Manual - Manual (Page 573)

Commands 545
Rack test
on, [ off ]
If this option is enabled, the rack attached will be checked.
Test rack
all sample racks listed in the configuration
Selection of the rack name for the rack which must be put on. In this way
you can ensure that the method can only be carried out with this rack. If
another sample rack is detected while executing the command, a message
is displayed and an Error track will be started if there is one defined.
HEATER
Command for controlling the oven temperature of the 774 Oven Sample Proc-
essor.
Devices
This command can only be executed with the 774 Oven Sample Processor.
Appearance
The command has the following appearance:
Parameters
The parameters for the command HEATER are configured in the following dialog
window:
• HEATER
HEATER - properties
Command name
25 characters, [ Oven temperature # ]
Name of the command.