Metrohm tiamo 1.1 Manual - Manual (Page 750)

722 Configuration
Exchange unit
Hardware
Name
24 characters, [ 'empty' ]
Freely definable name for exchange unit.
Type
Shows the type of exchange unit:
EU
Non-intelligent exchange unit without data chip.
IEU
Intelligent 806 Exchange Unit with data chip.
Order number
24 characters, [ 'empty' ]
Order number of exchange unit. With intelligent exchange units the order
number is read off automatically and cannot be edited.
Serial number
24 characters, [ 'empty' ]
Serial number of exchange unit. With intelligent exchange units the serial
number is read off automatically and cannot be edited.
Cylinder volume
1, 5, 10, [ 20 ], 50 mL
Cylinder volume of exchange unit. With intelligent exchange units the cylin-
der volume is read off automatically and cannot be edited. If in the method
you have selected a solution in a titration or dosing command then the cyl-
inder volume will be checked in the sequence.
Cylinder serial number
8 characters, [ 'empty' ]
Serial number of cylinder. It is printed on new cylinders. With intelligent ex-
change units it is read off automatically. It can be altered at any time, e.g. if
the cylinder has to be replaced.