Metrohm tiamo 1.1 Manual - Manual (Page 241)

Templates for curve overlay 213
Options
Options for the graphical display of the superimposed curves.
Template name
50 characters
Name for the curve overlay template which is saved in the configuration da-
tabase per client.
Command type
Selection of command types
Selection of the command type from which curves are to be superimposed.
Autoscaling
[ on ], off
If this option is switched on then the x axis in the curve window will be
scaled automatically. In this case the fields
Start value and End value cannot
be edited.
Show grid
on, [ off ]
If this option is switched on then a grid will be shown against the back-
ground.
Grid type
Select line type
Selects the type of grid line.
Grid color
Color selection, [ gray ]
Selects the color for the grid lines.
Background
Background color
Color selection, [ white ]
Selects the color for the curve background.
Show end points
on, [ off ]
If this option is switched on then the found endpoints will be shown on the
curve with the symbol ♦ and labeled with
EP# (potentiometric endpoints),
BP# (break point) or FP# (fixed endpoint).
Automatic EPs
Color selection, [ black ]
Selects the color for automatically set endpoints.
Manual EPs
Color selection, [ pink ]
Selects the color for manually set endpoints.