Metrohm tiamo 1.1 Manual - Manual (Page 600)

572 Method
Transfer commands
The non-editable table lists all defined transfer commands which are sent in
the listed sequence.
Moves the selected command upward (changes the sequence).
Moves the selected command downward (changes the sequence).
Open the dialog window Transfer command for entering a new transfer
command.
Note
10 transfer commands can be entered at maximum.
Open the dialog window Transfer command to edit the selected transfer
command.
Deleting the selected transfer command.
Timeout
on, [ off ]
[ 0 ] ... 9999.9; [ min ], s
Optional entry of a maximum waiting time. In case not all transfer com-
mands are finished after this time period, the command is cancelled and
the next command is started.
TRANSFER - transfer commands
Name
50 characters, [ 'leer' ]
Freely definable name for the transfer command.
Action
[ Read ]
The character string defined in Command (optional) will be sent to the de-
vice. The answer of the device is expected within the Timeout defined for
the device settings and evaluated.
Write
The character string defined in Command (optional) will be sent to the de-
vice.
Wait for
The character string defined in Command (optional) will be sent to the de-
vice. The answer of the device must be identical to the regular expression in