Metrohm tiamo 1.1 Manual - Manual (Page 590)

562 Method
5.6.11 Communication commands
Commands for the communication within the program or with external devices.
The following four communication commands can be selected:
•
CTRL
Setting output lines.
• SCAN
Scanning input lines.
• SEND
Sending event messages.
• RECEIVE
Waiting for event messages or status messages.
•
TRANSFER
Data transfer via RS232 to external devices.
CTRL
Command for setting remote output lines.
Devices
This command can be executed with the following devices:
Titrino: 702*, 716*, 718*, 719*, 720*, 721*, 736*, 751, 758, 784, 785, 794*, 795,
798, 799 (* instruments with only 3 outputs)
Titrando: 808, 809, 835, 836, 841, 842, 855
Dosing Interface: 846
Coulometer: 756, 831
Sample Processor: 730, 774, 778, 789, 814, 815, 855
Appearance
The command has the following appearance:
Parameters
The parameters for the command CTRL are configured in the following dialog win-
dow:
• CTRL