Metrohm tiamo 1.1 Manual - Manual (Page 106)

78 General program functions
Special position (only for normal beakers and ext. pos.)
Selection or input of the lift position to be moved to for the current rack po-
sition (normal beakers, special beakers, external position).
Start the move to the target position. After the start the button changes to
[Stop] , the two lower buttons are shown as inactive (gray), and the status
display changes from Ready to Move... .
Move the lift upward for as long as the button is pressed.
Move the lift downward for as long as the button is pressed.
Swing head position
Set the position (angle) of the swing head at the selected tower.
Current position
Shows the current position of the swing head in °.
Target position
[ 0.0 ] ...330.0 °, External 1...4
Entry or selection of the swing head position to be moved to.
Start the move to the target position. After the start the button changes to
[Stop] , the two lower buttons are shown as inactive (gray), and the status
display changes from Ready to Move... .
Move the swing head to the left (toward 0° ) for as long as the button is
pressed.
Move the swing head to the right (toward 330° ) for as long as the button is
pressed.