Metrohm tiamo 1.1 Manual - Manual (Page 163)

Subwindow Run 135
Edit sample data
With the menu item Edit, Edit line on the tab Determination series the dialog window
Edit line opens.
The fields in this dialog window have the same color as the lines in the working
sample table:
Light gray background
Processed lines. Data in these lines can no longer be altered.
Orange background
Currently running line. If sample data is only altered after the start of the de-
termination (in the status
BUSY ) then this is regarded as being a live modifi-
cation.
White background
Lines that have not yet been processed. These lines can be edited.
Note
In these fields of this dialog window generally no formula can be entered.
Method
50 characters, method selection
Entry or selection of the method from the current method group with which
the determination is to be carried out.
Open the window Open method for the extended method selection, if sev-
eral method groups exist. If in this window a method from a different group
to the current method group is selected then from now on this group will be
the current method group for the quick selection of methods in the Method
field.
Sample position
[ 1 ] ... 999
Position of the sample on the rack. This number is used to move to the
sample position with the command
MOVE . For this Target = sample position
must be set.
ID1 ... ID8
100 characters, selection from text templates
Sample identifications ID1...ID8. In this field any text can be entered, a
check of the type and limits is only made at the start of the determination.
For sample identifications of the
Date/Time type the input must be made in
the format YYYY-MM-DD or YYYY-MM-DD hh:mm:ss . If Text templates have
been defined for sample identification then they can be selected.
Sample size
[ 1.0 ], numerical with max. 10 numbers
Sample size (weight). In this field only numbers, decimal point, + , –, E and e
can be entered. A check of the limits is only made at the start of the deter-
mination.