Metrohm tiamo 1.1 Manual - Manual (Page 479)

Commands 451
5.6.6 Measuring commands
Commands for measurements with different measured quantities.
The following measuring commands can be selected:
• MEAS pH
Potentiometric pH measurement with pH electrodes.
• MEAS U
Potentiometric voltage measurement with metal electrodes.
• MEAS Ipol
Voltametric measurement with selectable polarization current (meas-
ured quantity U).
• MEAS Upol
Amperometric measurement with selectable polarization voltage
(measured quantity I).
• MEAS T
Temperature measurement.
• MEAS T/Flow
Temperature and gas flow measurement.
• MEAS Conc
Concentration measurement (direct measurement).
• MEAS Cond
Conductivity measurement.
•
STDADD man
Standard addition with manual addition of the standard addition solu-
tion.
•
STDADD dos
Standard addition with addition of the standard addition solution from
a dosing device.
•
STDADD auto
Standard addition with automatic addition of the standard addition so-
lution from a dosing device in such a way that a constant potential dif-
ference results.
MEAS pH
Command for potentiometric pH measurements with pH electrodes.
Devices
This command can be executed with the following devices:
Titrino: 702, 716, 718, 719, 720, 721, 736, 751, 758, 785, 794, 798, 799
Titrando: 808, 809, 835, 836, 841
Appearance
The command has the following appearance: