Metrohm tiamo 1.1 Manual - Manual (Page 596)

568 Method
Note
In order that the event message from the SEND command can be handled by
the receiver command, the receiver command must be running and able to
process the message being sent. Example: A SEND command in track A
should start a KFT command in track B by sending Start titration . The condi-
tioning in the KFT command must be finished (= Cond ok ) by the time the
SEND command is being executed. Otherwise the titration wouldn't be started
and the message
Start titration would be distorted.
Comment
250 characters, [ 'empty' ]
Comment about the event message.
RECEIVE
Command for awaiting event messages or status messages produced by
commands.
Appearance
The command has the following appearance:
Parameters
The parameters for the command RECEIVE are configured in the following dialog
window:
• RECEIVE
RECEIVE - properties
Command name
25 characters, [ Receive # ]
Name of the command.