Metrohm tiamo 1.1 Manual - Manual (Page 250)

222 Database
shown. If the table has been filtered the total number of filtered determina-
tions is shown together with
(filtered) .
Jumps to the next set of determinations in the table.
Jumps to the last set of determinations in the table.
Table navigation
In the determination table navigation can be carried out with the mouse and the
vertical and horizontal scroll bars. The following possibilities are also provided by
the keyboard:
[u]
Moves the line cursor up by one field.
[v]
Moves the line cursor down by one field.
[Ctrl] [End]
Jumps to the last determination in the current set.
[Ctrl] [Home]
Jumps to the first determination in the current set.
[Page Up]
Pages backward within the current set.
[Page Down]
Pages forward within the current set.
[Alt] [End]
Jumps to last determination (of all).
[Alt] [Home]
Jumps to first determination (of all).
[Alt] [s]
Jumps to first data record of previous set.
[Alt] [t]
Jumps to first data record of next set.
In the determination table it is not possible to show more than 200 determinations
at once. If more than 200 determinations are present in the database then the
Navigation bar must be used to switch to further sets of determinations.
Data record selection
The determinations selected in the table are shown in turquoise, the focused de-
termination whose data is shown in the other Subwindows is indicated by an ar-
row in front of the line number. When a database is opened the first determination
is always selected and focused.
The following possibilities are available for the selection of determinations in the
determination table:
• Single determinations
Single determinations are selected by clicking on them with the mouse
within the line (including line number). This determination, whose data
is shown in the other opened subwindows, is now focused and re-
ceives an arrow in front of the line number.
• Several determinations in sequence
In order to select several determinations in sequence the required
range can be selected with the left-hand mouse key pressed down. It
is also possible to select a range with a click on the first determination