Metrohm tiamo 1.1 Manual - Manual (Page 298)

270 Database
The display of the measuring points in the table can be defined per window and
per command type in Properties.
4.11.2 Measuring point list
With the context-sensitive menu item Measuring point list... in the curve window the
dialog window Measuring point list - 'Command name' opens for showing the meas-
uring point list for the selected curve.
The display of the measuring points in the table can be defined per window and
per command type in Properties.
The column
Monitoring is displayed for STAT and DOS by default and can contain
the following entries:
_Meas.v.
Measured value lower limit exceeded.
¯Meas.v.
Measured value upper limit exceeded.
_Dos.r.
Dosing rate lower limit exceeded.