Metrohm tiamo 1.1 Manual - Manual (Page 471)

Commands 443
Monitoring
The monitoring processes can be defined and switched on here.
Command name
25 characters, [ STAT U # ]
Name of the command.
Monitoring Measured value
on, [ off ]
If this option is switched on then the measured value will be monitored and
any limit infringements will be entered in the list of measuring points.
Lower limit
[ -2000.0 ] ... 2000.0 mV (Titrando)
[ -2000 ] ... 2000 mV (Titrino)
Lower limit of the measured value. When the measured value falls below
this value, the action Measured value lower limit exceeded is triggered.