Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 991)

Brocade 6910 Ethernet Access Switch Configuration Guide 941
53-1002581-01
Simple Network Management Protocol
42
Interface
To configure a local SNMPv3 user:
1. Click Administration, SNMP.
2. Select Configure User from the Step list.
3. Select Add SNMPv3 Local User from the Action list.
4. Enter a name and assign it to a group. If the security model is set to SNMPv3 and the security
level is authNoPriv or authPriv, then an authentication protocol and password must be
specified. If the security level is authPriv, a privacy password must also be specified.
5. Click Apply
FIGURE 258 Configuring Local SNMPv3 Users
To show local SNMPv3 users:
1. Click Administration, SNMP.
2. Select Configure User from the Step list.
3. Select Show SNMPv3 Local User from the Action list.