Displaying cpu utilization, Figure 24 – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual
Page 720
670
Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Displaying CPU Utilization
32
Displaying CPU Utilization
Use the System > CPU Utilization page to display information on CPU utilization.
CLI References
•
Parameters
The following parameters are displayed:
•
Time Interval – The interval at which to update the displayed utilization rate. (Options: 1, 5, 10,
30, 60 seconds; Default: 1 second)
•
CPU Utilization – CPU utilization over specified interval.
Interface
To display CPU utilization:
1. Click System, then CPU Utilization.
2. Change the update interval if required. Note that the interval is changed as soon as a new
setting is selected.
FIGURE 24
Displaying CPU Utilization