Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 262)

212 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Web Authentication
10
Command Mode
Global Configuration
Example
Console(config)#web-auth quiet-period 120
Console(config)#
web-auth session-timeout
This command defines the amount of time a web-authentication session remains valid. When the
session timeout has been reached, the host is logged off and must re-authenticate itself the next
time data transmission takes place. Use the no form to restore the default.
Syntax
web-auth session-timeout timeout
no web-auth session timeout
timeout - The amount of time that an authenticated session remains valid. (Range:
300-3600 seconds)
Default Setting
3600 seconds
Command Mode
Global Configuration
Example
Console(config)#web-auth session-timeout 1800
Console(config)#
web-auth system-auth-control
This command globally enables web authentication for the switch. Use the no form to restore the
default.
Syntax
[no] web-auth system-auth-control
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
Both web-auth system-auth-control for the switch and web-auth for an interface must be enabled
for the web authentication feature to be active.