Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 795)

Brocade 6910 Ethernet Access Switch Configuration Guide 745
53-1002581-01
Configuring MAC-based VLANs
34
Interface
To map a MAC address to a VLAN:
1. Click VLAN, MAC-Based.
2. Select Add from the Action list.
3. Enter an address in the MAC Address field.
4. Enter an identifier in the VLAN field. Note that the specified VLAN need not already be
configured.
5. Enter a value to assign to untagged frames in the Priority field.
6. Click Apply.
FIGURE 98 Configuring MAC-Based VLANs
To show the MAC addresses mapped to a VLAN:
1. Click VLAN, MAC-Based.
2. Select Show from the Action list.
FIGURE 99 Showing MAC-Based VLANs