Show rmon events, Show rmon history, Show rmon statistics – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual
Page 182

132
Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Remote Monitoring Commands
7
Taking delta samples, last value was 0
Rising threshold is 892800, assigned to event 0
Falling threshold is 446400, assigned to event 0
.
.
.
show rmon events
This command shows the settings for all configured events.
Command Mode
Privileged Exec
Example
Console#show rmon events
Event 2 is valid, owned by mike
Description is urgent
Event firing causes log and trap to community , last fired 00:00:00
Console#
show rmon history
This command shows the sampling parameters configured for each entry in the history group.
Command Mode
Privileged Exec
Example
Console#show rmon history
Entry 1 is valid, and owned by
Monitors 1.3.6.1.2.1.2.2.1.1.1 every 1800 seconds
Requested # of time intervals, ie buckets, is 8
Granted # of time intervals, ie buckets, is 8
Sample # 1 began measuring at 00:00:01
Received 77671 octets, 1077 packets,
61 broadcast and 978 multicast packets,
0 undersized and 0 oversized packets,
0 fragments and 0 jabbers packets,
0 CRC alignment errors and 0 collisions.
# of dropped packet events is 0
Network utilization is estimated at 0
.
.
.
show rmon statistics
This command shows the information collected for all configured entries in the statistics group.
Command Mode
Privileged Exec
Example
Console#show rmon statistics
Interface 1 is valid, and owned by
Monitors 1.3.6.1.2.1.2.2.1.1.1 which has