Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 1116)

1066 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Layer 2 IGMP (Snooping and Query)
46
3. Select the VLAN that will propagate the multicast service, specify the interface attached to a
multicast service (through an IGMP-enabled switch or multicast router), and enter the
multicast IP address.
4. Click Apply.
FIGURE 357 Assigning an Interface to a Multicast Service
To show the static interfaces assigned to a multicast service:
1. Click Multicast, IGMP Snooping, IGMP Member.
2. Select Show Static Member from the Action list.
3. Select the VLAN for which to display this information.
FIGURE 358 Showing Static Interfaces Assigned to a Multicast Service
To show the all interfaces statically or dynamically assigned to a multicast service:
1. Click Multicast, IGMP Snooping, IGMP Member.
2. Select Show Current Member from the Action list.
3. Select the VLAN for which to display this information.