Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual
Page 722
672
Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Resetting the System
32
Parameters
The following parameters are displayed:
System Reload Configuration
•
Reset Mode – Restarts the switch immediately or at the specified time(s).
•
Immediately – Restarts the system immediately.
•
In – Specifies an interval after which to reload the switch. (The specified time must be
equal to or less than 24 days.)
•
hours – The number of hours, combined with the minutes, before the switch resets.
(Range: 0-576)
•
minutes – The number of minutes, combined with the hours, before the switch resets.
(Range: 0-59)
•
At – Specifies a time at which to reload the switch.
•
DD - The day of the month at which to reload. (Range: 1-31)
•
MM - The month at which to reload. (january ... december)
•
YYYY - The year at which to reload. (Range: 2001-2050)
•
HH - The hour at which to reload. (Range: 0-23)
•
MM - The minute at which to reload. (Range: 0-59)
•
Regularly – Specifies a periodic interval at which to reload the switch.
Time
•
HH - The hour at which to reload. (Range: 0-23)
•
MM - The minute at which to reload. (Range: 0-59)
Period
•
Daily - Every day.
•
Weekly - Day of the week at which to reload. (Range: Sunday ... Saturday)
•
Monthly - Day of the month at which to reload. (Range: 1-31)
Interface
To restart the switch:
1. Click System, then Reset.
2. Select the required reset mode.
3. For any option other than to reset immediately, fill in the required parameters
4. Click Apply.
5. When prompted, confirm that you want reset the switch.