Clearing the dynamic address table, Figure 109 cle – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual
Page 805
Brocade 6910 Ethernet Access Switch Configuration Guide
755
53-1002581-01
Clearing the Dynamic Address Table
35
Clearing the Dynamic Address Table
Use the MAC Address > Dynamic (Clear Dynamic MAC) page to remove any learned entries from the
forwarding database.
CLI References
•
“clear mac-address-table dynamic”
Parameters
These parameters are displayed:
•
Clear by – All entries can be cleared; or you can clear the entries for a specific MAC address, all
the entries in a VLAN, or all the entries associated with a port or trunk.
Interface
To clear the entries in the dynamic address table:
1. Click MAC Address, Dynamic.
2. Select Clear Dynamic MAC from the Action list.
3. Select the method by which to clear the entries (i.e., All, MAC Address, VLAN, or Interface).
4. Enter information in the additional fields required for clearing entries by MAC Address, VLAN, or
Interface.
5. Click Clear.
FIGURE 109
Clearing Entries in the Dynamic MAC Address Table