Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 526)

476 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
MVR for IPv4
23
mvr
This command enables Multicast VLAN Registration (MVR) globally on the switch. Use the no form
of this command to globally disable MVR.
Syntax
[no] mvr
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
Only IGMP version 2 or 3 hosts can issue multicast join or leave messages. If MVR must be
configured for an IGMP version 1 host, the multicast groups must be statically assigned using the
mvr vlan group command.
Example
The following example enables MVR globally.
Console(config)#mvr
Console(config)#
mvr associated-profile
This command binds the MVR group addresses specified in a profile to an MVR domain. Use the no
form of this command to remove the binding.
Syntax
[no] mvr domain domain-id associated-profile profile-name
domain-id - An independent multicast domain. (Range: 1-5)
profile-name - The name of a profile containing one or more MVR group addresses.
(Range: 1-21 characters)
Default Setting
Disabled
Command Mode
Global Configuration
Example
The following an MVR group address profile to domain 1:
Console(config)#mvr domain 1 associated-profile rd
Console(config)#