Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 742)

692 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Port Configuration
33
To show ingress or egress traffic statistics for a sample entry:
1. Click Interface, Port, Statistics, or Interface, Trunk, Statistics.
2. Select Show Details from the Action menu.
3. Select Input Previous Entry or Output Previous Entry from the options for Mode.
4. Select an interface from the Port or Trunk list.
5. Select an sampling entry from the Name list.
FIGURE 46 Showing Ingress Statistics for a History Sample
Displaying Transceiver Data
Use the Interface > Port > Transceiver page to display identifying information and functional
parameters for optical transceivers.
CLI References
• “show interfaces transceiver” on page 284
• “transceiver-threshold rx-power” on page 272
Command Usage
The switch can display diagnostic information for SFP modules which support the SFF-8472
Specification for Diagnostic Monitoring Interface for Optical Transceivers. This information allows
administrators to remotely diagnose problems with optical devices. This feature, referred to as
Digital Diagnostic Monitoring (DDM) in the command display, provides information on transceiver
parameters including temperature, supply voltage, laser bias current, laser power, received optical
power.
Parameters
These parameters are displayed:
• Port – Port number. (Range: 1-12)