Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 215)

Brocade 6910 Ethernet Access Switch Configuration Guide 165
53-1002581-01
Telnet Server
9
ip telnet port
This command specifies the TCP port number used by the Telnet interface. Use the no form to use
the default port.
Syntax
ip telnet port port-number
no telnet port
port-number - The TCP port number to be used by the browser interface. (Range: 1-65535)
Default Setting
23
Command Mode
Global Configuration
Example
Console(config)#ip telnet port 123
Console(config)#
ip telnet server
This command allows this device to be monitored or configured from Telnet. Use the no form to
disable this function.
Syntax
[no] ip telnet server
Default Setting
Enabled
Command Mode
Global Configuration
Example
Console(config)#ip telnet server
Console(config)#
show ip telnet
This command displays the configuration settings for the Telnet server.
Command Mode
Normal Exec, Privileged Exec