Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 263)

Brocade 6910 Ethernet Access Switch Configuration Guide 213
53-1002581-01
Web Authentication
10
Example
Console(config)#web-auth system-auth-control
Console(config)#
web-auth
This command enables web authentication for an interface. Use the no form to restore the default.
Syntax
[no] web-auth
Default Setting
Disabled
Command Mode
Interface Configuration
Command Usage
Both web-auth system-auth-control for the switch and web-auth for a port must be enabled for the
web authentication feature to be active.
Example
Console(config-if)#web-auth
Console(config-if)#
web-auth re-authenticate (Port)
This command ends all web authentication sessions connected to the port and forces the users to
re-authenticate.
Syntax
web-auth re-authenticate interface interface
interface - Specifies a port interface.
ethernet unit/port
unit - This is unit 1.
port - Port number. (Range: 1-12)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#web-auth re-authenticate interface ethernet 1/2
Console#