Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 695)

Brocade 6910 Ethernet Access Switch Configuration Guide 645
53-1002581-01
Navigating the Web Browser Interface
31
Show MTU Shows the maximum transmission unit (MTU) cache for destinations that
have returned an ICMP packet-too-big message along with an acceptable
MTU to this switch 1032
IP Service 1047
DNS Domain Name Service
General 1047
Configure Global Enables DNS lookup; defines the default domain name appended to
incomplete host names 1047
Add Domain Name Defines a list of domain names that can
be appended to incomplete host names 1048
Show Domain Names Shows the configured domain name list 1048
Add Name Server Specifies IP address of name servers for dynamic lookup 1049
Show Name Servers Shows the name server address list 1049
Static Host Table 1051
Add Configures static entries for domain name to address mapping 1051
Show Shows the list of static mapping entries 1051
Modify Modifies the static address mapped to the selected host name 1051
Cache Displays cache entries discovered by designated name servers 1052
DHCP Dynamic Host Configuration Protocol
Client Specifies the DHCP client identifier for an interface 1053
Relay Specifies DHCP relay servers 1054
Snooping 903
Configure Global Enables DHCP snooping globally, MAC-address verification, information
option; and sets the information policy 904
Configure VLAN Enables DHCP snooping on a VLAN 906
Configure Interface Sets the trust mode for an interface 907
Show Information Displays the DHCP Snooping binding information 908
Multicast 1057
IGMP Snooping 1058
General Enables multicast filtering; configures parameters for multicast snooping 1059
Multicast Router 1063
Add Static Multicast Router Assigns ports that are attached to a neighboring multicast router 1063
Show Static Multicast Router Displays ports statically configured as attached to a neighboring
multicast router 1063
Show Current Multicast Router Displays ports attached to a neighboring multicast router, either through
static or dynamic configuration 1063
IGMP Member 1065
Add Static Member Statically assigns multicast addresses to the selected VLAN 1065
TABLE 151 Switch Main Menu (Continued)
Menu Description Page