Figure 72, Confi – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual
Page 767
Brocade 6910 Ethernet Access Switch Configuration Guide
717
53-1002581-01
VLAN Trunking
33
•
VLAN Trunking Status – Enables VLAN trunking on the selected interface.
Interface
To enable VLAN trunking on a port or trunk:
1. Click Interface, VLAN Trunking.
2. Click Port or Trunk to specify the interface type.
3. Enable VLAN trunking on any of the ports or on a trunk.
4. Click Apply.
FIGURE 72
Configuring VLAN Trunking