Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 615)

Brocade 6910 Ethernet Access Switch Configuration Guide 565
53-1002581-01
OAM Commands
26
Example
Console(config)#interface ethernet 1/1
Console(config-if)#efm oam critical-link-event dying-gasp
Console(config-if)#
efm oam link-monitor frame
This command enables reporting of errored frame link events. Use the no form to disable this
function.
Syntax
[no] efm oam link-monitor frame
Default Setting
Enabled
Command Mode
Interface Configuration
Command Usage
• An errored frame is a frame in which one or more bits are errored.
• If this feature is enabled and an errored frame link event occurs, the local OAM entity (this
switch) sends an Event Notification OAMPDU.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#efm oam link-monitor frame
Console(config-if)#
efm oam link-monitor frame threshold
This command sets the threshold for errored frame link events. Use the no form to restore the
default setting.
Syntax
[no] efm oam link-monitor frame threshold count
count - The threshold for errored frame link events. (Range: 1-65535)
Default Setting
1
Command Mode
Interface Configuration
Command Usage
If this feature is enabled, an event notification message is sent if the threshold is reached or
exceeded within the period specified by the
efm oam link-monitor frame window command
( page 566 ). The Errored Frame Event TLV includes the number of errored frames detected during
the specified period.