Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 187)

Brocade 6910 Ethernet Access Switch Configuration Guide 137
53-1002581-01
Flow Sampling Commands
8
Command Mode
Interface Configuration (Ethernet)
Example
Console(config)#interface ethernet 1/9
Console(config-if)#sflow max-datagram-size 1500
Console(config-if)#
sflow max-header-size
This command configures the maximum size of the sFlow datagram header. Use the no form to
restore the default setting.
Syntax
sflow max-header-size max-header-size
no max-header-size
max-header-size - The maximum size of the sFlow datagram header.
(Range: 64-256 bytes)
Default Setting
128 bytes
Command Mode
Interface Configuration (Ethernet)
Example
Console(config)#interface ethernet 1/9
Console(config-if)#sflow max-header-size 256
Console(config-if)#
sflow owner
This command configures the name of the receiver (i.e., sFlow Collector). Use the no form to
remove this name.
Syntax
sflow owner name
no sflow owner
name - The name of the receiver. (Range: 1-256 characters)
Default Setting
None
Command Mode
Interface Configuration (Ethernet)