Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 925)

Brocade 6910 Ethernet Access Switch Configuration Guide 875
53-1002581-01
Access Control Lists
41
Interface
To bind an ACL to a port:
1. Click Security, ACL.
2. Select Configure Interface from the Step list.
3. Select Add Mirror from the Action list.
4. Select a port.
5. Select the name of an ACL from the ACL list.
6. Click Apply.
FIGURE 209 Configuring ACL Mirroring
To show the ACLs to be mirrored:
1. Select Configure Interface from the Step list.
2. Select Show Mirror from the Action list.
3. Select a port.
FIGURE 210 Showing the VLANs to Mirror
Showing ACL Hardware Counters
Use the Security > ACL > Configure Interface (Show Hardware Counters) page to show statistics for
ACL hardware counters.
CLI References
• “show access-list” on page 259