Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 105)

Brocade 6910 Ethernet Access Switch Configuration Guide 55
53-1002581-01
Banner Information
5
banner configure mux
This command is used to configure the mux information displayed in the banner. Use the no form to
restore the default setting.
Syntax
banner configure mux muxinfo
no banner configure mux
muxinfo - The circuit and PVC to which the switch is connected.
(Maximum length: 32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
Input strings cannot contain spaces. The banner configure mux command interprets spaces as
data input boundaries. The use of underscores ( _ ) or other unobtrusive non-letter characters is
suggested for situations where white space is necessary for clarity.
Example
Console(config)#banner configure mux telco-8734212kx_PVC-1/23
Console(config)#
banner configure note
This command is used to configure the note displayed in the banner. Use the no form to restore the
default setting.
Syntax
banner configure note note-info
no banner configure note
note-info - Miscellaneous information that does not fit the other banner categories, or any
other information of importance to users of the switch CLI. (Maximum length: 150
characters)
Default Setting
None
Command Mode
Global Configuration