Displaying arp entries, Figure 334 dis, Figure 335 dis – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual
Page 1089
Brocade 6910 Ethernet Access Switch Configuration Guide
1039
53-1002581-01
Address Resolution Protocol
43
Displaying ARP Entries
Use the IP > ARP (Show Information) page to display dynamic entries in the ARP cache. The ARP
cache contains entries for local interfaces, including subnet, host, and broadcast addresses. These
entries are dynamically learned through replies to broadcast messages.
CLI References
•
•
Interface
To display all dynamic entries in the ARP cache:
1. Click IP, ARP.
2. Select Show Information from the Step List.
3. Click Dynamic Address.
FIGURE 334
Displaying ARP Entries
To display all local entries in the ARP cache:
1. Click IP, ARP.
2. Select Show Information from the Step List.
3. Click Other Address.
FIGURE 335
Displaying Local ARP Entries