Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 309)

Brocade 6910 Ethernet Access Switch Configuration Guide 259
53-1002581-01
ACL Information
11
Example
Console#clear access-list hardware counters
Console#
show access-group
This command shows the port assignments of ACLs.
Command Mode
Privileged Executive
Example
Console#show access-group
Interface ethernet 1/2
IP access-list david
MAC access-list jerry
Console#
show access-list
This command shows all ACLs and associated rules.
Syntax
show access-list
[[arp [acl-name]] | [hardware counters]
[ip [extended [acl-name] | standard [acl-name]] |
[ipv6 [extended [acl-name] | standard [acl-name]] |
[mac [acl-name]] | [tcam-utilization] | [hardware counters]]
arp – Shows ingress or egress rules for ARP ACLs.
hardware counters – Shows statistics for all ACLs.
ip extended – Shows ingress rules for Extended IPv4 ACLs.
ip standard – Shows ingress rules for Standard IPv4 ACLs.
ipv6 extended – Shows ingress rules for Extended IPv6 ACLs.
ipv6 standard – Shows ingress rules for Standard IPv6 ACLs.
mac – Shows ingress rules for MAC ACLs.
tcam-utilization – Shows the percentage of user configured ACL rules as a percentage of
total ACL rules
acl-name – Name of the ACL. (Maximum length: 16 characters)
Command Mode
Privileged Exec
Example
Console#show access-list
IP standard access-list david:
permit host 10.1.1.21
permit 168.92.0.0 255.255.15.0
IP extended access-list bob: