Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 201)

Brocade 6910 Ethernet Access Switch Configuration Guide 151
53-1002581-01
TACACS+ Client
9
Default Setting
authentication port - 49
timeout - 5 seconds
retransmit - 2
Command Mode
Global Configuration
Example
Console(config)#tacacs-server 1 host 192.168.1.25 port 181 timeout 10 retransmit 5
key green
Console(config)#
tacacs-server key
This command sets the TACACS+ encryption key. Use the no form to restore the default.
Syntax
tacacs-server key key-string
no tacacs-server key
key-string - Encryption key used to authenticate logon access for the client. Do not use
blank spaces in the string. (Maximum length: 48 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#tacacs-server key green
Console(config)#
tacacs-server port
This command specifies the TACACS+ server network port. Use the no form to restore the default.
Syntax
tacacs-server port port-number
no tacacs-server port
port-number - TACACS+ server TCP port used for authentication messages.
(Range: 1-65535)
Default Setting
49