Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 99)

Brocade 6910 Ethernet Access Switch Configuration Guide 49
53-1002581-01
Banner Information
5
banner configure
This command is used to interactively specify administrative information for this device.
Syntax
banner configure
Default Setting
None
Command Mode
Global Configuration
Command Usage
The administrator can batch-input all details for the switch with one command. When the
administrator finishes typing the company name and presses the enter key, the script prompts for
the next piece of information, and so on, until all information has been entered. Pressing enter
without inputting information at any prompt during the script’s operation will leave the field empty.
Spaces can be used during script mode because pressing the enter key signifies the end of data
input. The delete and left-arrow keys terminate the script. The use of the backspace key during
script mode is not supported. If, for example, a mistake is made in the company name, it can be
corrected with the banner configure company command.
Example
Console(config)#banner configure
Company: Brocade
Responsible department: R&D Dept
Name and telephone to Contact the management people
Manager1 name: Sr. Network Admin
phone number: 123-555-1212
Manager2 name: Jr. Network Admin
phone number: 123-555-1213
Manager3 name: Night-shift Net Admin / Janitor
phone number: 123-555-1214
The physical location of the equipment.
City and street address: 12 Straight St. Motown, Zimbabwe
Information about this equipment:
Manufacturer: Brocade
ID: 123_unique_id_number
Floor: 2
Row: 7
Rack: 29
Shelf in this rack: 8
Information about DC power supply.
Floor: 2
Row: 7
Rack: 25
Electrical circuit: : ec-177743209-xb
Number of LP:12
Position of the equipment in the MUX:1/23
IP LAN:192.168.1.1
Note: This is a random note about this managed switch and can contain
miscellaneous information.
Console(config)#