Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 286)

236 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
ARP Inspection
10
show ip arp inspection log
This command shows information about entries stored in the log, including the associated VLAN,
port, and address components.
Command Mode
Privileged Exec
Example
Console#show ip arp inspection log
Total log entries number is 1
Num VLAN Port Src IP Address Dst IP Address Src MAC Address Dst MAC Address
--- ---- ---- -------------- -------------- --------------- --------------
1 1 11 192.168.2.2 192.168.2.1 00-04-E2-A0-E2-7C FF-FF-FF-FF-FF-FF
Console#
show ip arp inspection statistics
This command shows statistics about the number of ARP packets processed, or dropped for
various reasons.
Command Mode
Privileged Exec
Example
Console#show ip arp inspection statistics
ARP packets received before rate limit : 150
ARP packets dropped due to rate limt : 5
Total ARP packets processed by ARP Inspection : 150
ARP packets dropped by additional validation (source MAC address) : 0
ARP packets dropped by additional validation (destination MAC address): 0
ARP packets dropped by additional validation (IP address) : 0
ARP packets dropped by ARP ACLs : 0
ARP packets dropped by DHCP snooping : 0
Console#
show ip arp inspection vlan
This command shows the configuration settings for VLANs, including ARP Inspection status, the
ARP ACL name, and if the DHCP Snooping database is used after ARP ACL validation is completed.
Syntax
show ip arp inspection vlan [vlan-id]
vlan-id - VLAN ID. (Range: 1-4093)
Command Mode
Privileged Exec