Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 103)

Brocade 6910 Ethernet Access Switch Configuration Guide 53
53-1002581-01
Banner Information
5
Example
Console(config)#banner configure equipment-location
710_Network_Path,_Indianapolis
Console(config)#
banner configure ip-lan
This command is used to configure the device IP address and subnet mask information displayed
in the banner. Use the no form to restore the default setting.
Syntax
banner configure ip-lan ip-mask
no banner configure ip-lan
ip-mask - The IP address and subnet mask of the device. (Maximum length: 32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
Input strings cannot contain spaces. The banner configure ip-lan command interprets spaces as
data input boundaries. The use of underscores ( _ ) or other unobtrusive non-letter characters is
suggested for situations where white space is necessary for clarity.
Example
Console(config)#banner configure ip-lan 192.168.1.1/255.255.255.0
Console(config)#
banner configure lp-number
This command is used to configure the LP number information displayed in the banner. Use the no
form to restore the default setting.
Syntax
banner configure lp-number lp-num
no banner configure lp-number
lp-num - The LP number. (Maximum length: 32 characters)
Default Setting
None
Command Mode
Global Configuration