Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 208)

158 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
AAA
9
server
This command adds a security server to an AAA server group. Use the no form to remove the
associated server from the group.
Syntax
[no] server {index | ip-address}
index - Specifies the server index. (Range: RADIUS 1-5, TACACS+ 1)
ip-address - Specifies the host IP address of a server.
Default Setting
None
Command Mode
Server Group Configuration
Command Usage
• When specifying the index for a RADIUS server, that server index must already be defined by
the
radius-server host command.
• When specifying the index for a TACACS+ server, that server index must already be defined by
the
tacacs-server host command.
Example
Console(config)#aaa group server radius tps
Console(config-sg-radius)#server 10.2.68.120
Console(config-sg-radius)#
accounting dot1x
This command applies an accounting method for 802.1X service requests on an interface. Use the
no form to disable accounting on the interface.
Syntax
accounting dot1x {default | list-name}
no accounting dot1x
default - Specifies the default method list created with the aaa accounting dot1x
command.
list-name - Specifies a method list created with the aaa accounting dot1x command.
Default Setting
None
Command Mode
Interface Configuration