Reload (privileged exec), Show reload, Reload (privileged exec) show reload – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual
Page 94: Reload, End (44)
44
Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
General Commands
4
Related Commands
reload (Privileged Exec)
This command restarts the system.
NOTE
When the system is restarted, it will always run the Power-On Self-Test. It will also retain all
configuration information stored in non-volatile memory by the copy running-config startup-config
command.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
This command resets the entire system.
Example
This example shows how to reset the switch:
Console#reload
System will be restarted, continue
show reload
This command displays the current reload settings, and the time at which next scheduled reload
will take place.
Command Mode
Privileged Exec
Example
Console#show reload
Reloading switch in time: 0 hours 29 minutes.
The switch will be rebooted at January 1 02:11:50 2001.
Remaining Time: 0 days, 0 hours, 29 minutes, 52 seconds.
Console#
end
This command returns to Privileged Exec mode.
Default Setting
None