Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 391)

Brocade 6910 Ethernet Access Switch Configuration Guide 341
53-1002581-01
Spanning Tree Commands
18
Default Setting
Floods to all other ports in the same VLAN.
Command Mode
Global Configuration
Command Usage
The spanning-tree system-bpdu-flooding command has no effect if BPDU flooding is disabled on a
port (see the
spanning-tree port-bpdu-flooding command).
Example
Console(config)#spanning-tree system-bpdu-flooding
Console(config)#
spanning-tree transmission-limit
This command configures the minimum interval between the transmission of consecutive
RSTP/MSTP BPDUs. Use the no form to restore the default.
Syntax
spanning-tree transmission-limit count
no spanning-tree transmission-limit
count - The transmission limit in seconds. (Range: 1-10)
Default Setting
3
Command Mode
Global Configuration
Command Usage
This command limits the maximum transmission rate for BPDUs.
Example
Console(config)#spanning-tree transmission-limit 4
Console(config)#
max-hops
This command configures the maximum number of hops in the region before a BPDU is discarded.
Use the no form to restore the default.
Syntax
max-hops hop-number
hop-number - Maximum hop number for multiple spanning tree. (Range: 1-40)