Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 209)

Brocade 6910 Ethernet Access Switch Configuration Guide 159
53-1002581-01
AAA
9
Example
Console(config)#interface ethernet 1/2
Console(config-if)#accounting dot1x tps
Console(config-if)#
accounting exec
This command applies an accounting method to local console, Telnet or SSH connections. Use the
no form to disable accounting on the line.
Syntax
accounting exec {default | list-name}
no accounting exec
default - Specifies the default method list created with the aaa accounting exec command.
list-name - Specifies a method list created with the aaa accounting exec command.
Default Setting
None
Command Mode
Line Configuration
Example
Console(config)#line console
Console(config-line)#accounting exec tps
Console(config-line)#exit
Console(config)#line vty
Console(config-line)#accounting exec default
Console(config-line)#
authorization exec
This command applies an authorization method to local console, Telnet or SSH connections. Use
the no form to disable authorization on the line.
Syntax
authorization exec {default | list-name}
no authorization exec
default - Specifies the default method list created with the aaa authorization exec
command.
list-name - Specifies a method list created with the aaa authorization exec command.
Default Setting
None
Command Mode
Line Configuration