Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 909)

Brocade 6910 Ethernet Access Switch Configuration Guide 859
53-1002581-01
Access Control Lists
41
3. Select Add Rule from the Action list.
4. Select the name of time range from the drop-down list.
5. Select a mode option of Absolute or Periodic.
6. Fill in the required parameters for the selected mode.
7. Click Apply.
FIGURE 197 Add a Rule to a Time Range
To show the rules configured for a time range:
1. Click Security, ACL.
2. Select Configure Time Range from the Step list.
3. Select Show Rule from the Action list.
FIGURE 198 Showing the Rules Configured for a Time Range