Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 140)

90 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
SMTP Alerts
5
Related Commands
show logging sendmail (93)
SMTP Alerts
These commands configure SMTP event handling, and forwarding of alert messages to the
specified SMTP servers and email recipients.
logging sendmail
This command enables SMTP event handling. Use the no form to disable this function.
Syntax
[no] logging sendmail
Default Setting
Enabled
Command Mode
Global Configuration
TABLE 21 show logging trap - display description
Field Description
Syslog logging Shows if system logging has been enabled via the logging on command.
REMOTELOG status Shows if remote logging has been enabled via the logging trap command.
REMOTELOG facility type The facility type for remote logging of syslog messages as specified in the logging
facility command.
REMOTELOG level type The severity threshold for syslog messages sent to a remote server as specified in
the
logging trap command.
REMOTELOG
server IP address The address of syslog servers as specified in the logging host command.
TABLE 22 Event Logging Commands
Command Function Mode
logging sendmail Enables SMTP event handling GC
logging sendmail host SMTP servers to receive alert messages GC
logging sendmail level Severity threshold used to trigger alert messages GC
logging sendmail
destination- email Email recipients of alert messages GC
logging sendmail
source-email Email address used for “From” field of alert messages GC
show logging sendmail Displays SMTP event handler settings NE, PE